Creation and configuration of yyds dry goods inventory Windows Server DHCP server

Idle time , Get down to business ,DHCP Server installation and configuration , as follows ：

1.DHCP Server installation

1.1 Start -> Management tools -> Server Manager -> Adding roles

1.2 Check DHCP

1.3 next step , It will automatically detect IP Address , The local IP The address is 192.168.1.238

1.4 This step is to resolve the domain name , Your domain name will be resolved by default , No need to change , You can also see if it needs to be modified according to the situation DNS（ Most don't need it ）.

1.5 This step is wins server setting ,Wins and DNS It's something like that , The difference is DNS Resolution is domain name , such as ​ ​www.baidu.com​​. and wins The analysis is NETBIOS Computer name , This can be understood simply , In many cases DNS.

1.6 Next, start adding scopes , That is, to be distributed IP Address range .

1.7 Click Add

1.8 This step is to ask if you enable ipv6 Address , Select no in this chapter

1.9 Automatically detect administrator account , If it is not an administrator account, you can add... In the alternate credentials .

1.10 next step Then you can install

The installation is over ～～

2. To configure DHCP The server

2.1 From the lower right corner -> choice DHCP

2.2 Choose ipv4, Right click and select new scope

2.3 Name it , next step

​ notes ： Fill in... As appropriate IP Address range .（ Can't write 192.168.2.0 and .255）

Add addresses to exclude , Like your gateway , Yours DNS Address, etc. , But in what you set IP Address range . If you just want to exclude a specific IP Address Just don't end IP Just fill in the address range , Here's a demonstration .

2.4 Fill in a random . Then click Add

2.5 Ask if you can start now Click enable , Will let you fill in a gateway address

​

2.6 Will check your domain name and DNS analysis , Your domain name and... Will be resolved by default DNS Address , The next step is good .

2.7 Will let you set up wins service , Fill in... According to your own situation , If necessary, you can fill in , The next step prompts whether to activate by default

2.8 I've seen the record , To this end . Therefore, we can also give Lu youprisoner a fixed IP Address found router

2.9 Enter and add IP Address

​ Be careful ： If you are prompted that there is no authorization ,ipv4 Will prompt you to authorize

2.10  Check your domain name , Right click to select authorization . It's settled.